Ruko Cylinder RD1620 M +0+0 D1200
Facts Series 1200
- Meets DS/EN 1303
- Boring protection
- Dirke fuse
- Patented profile
- Patented d12 technology
- Keys made of nickel silver
- Keys can only be copied by an approved Ruko dealer
The lock is standard (+0+0), i.e. 30.5 mm from the middle screw hole to both sides of the housing. Total 61 mm long
Based on this goal, it is extended.
If you need more, we will get them from the supplier in a short time.
Prices include VAT, read more about delivery to specific countries
|
|
 |
- EAN/GLN number
- 5708538013244
- Manufacturer item number
- 183044
Specifications
- Brand
- RUKO
- Cylinder Brand series
- Ruko serie 1200
- Cylinder type
- Dråbe
- Approvals / classifications
- EN1303 Sikringsniveau 60
Product features Ruko Series 1200 is a security product with D12 technology for private homes.
Technical specifications The locking cylinder uses the new patented d12 technology. The cylinder is made up of 6 advanced pins, with 2 code heights per pin and 12 code positions per key.
For all doors: the Series 1200 lock cylinders can be mounted in all locks and fit Ruko's wide range of fittings. Series 1200 is available in three variants: polished chrome, polished brass and stainless look. Approvals and markings The cylinder meets requirements according to DS/EN 1303:2005 6/2, which are used by insurance companies. Maintenance Before the lock is used for the first time, it must be lubricated with ASSA ABLOY lock spray.
ASSA ABLOY recommends that the lock is then lubricated at least every six months to ensure that it always functions optimally. The code tag is important As the owner of a Series 1200 lock, you must pay attention to the green code tag, shaped like a key. You must store it in a safe place so that you can always find it again. The code chip must be used to order extra locking cylinders and that way you can get the same key for your other external doors, the mailbox and the windows.