Conlan Mykey M1000 mifare reader, Black

Conlan Mykey M 1000 Mifare reader Modular to fit FUGA frames and modules Stand Alone Stand Alone systems are our specialty. In short, Stand Alone means that you do not need a PC connected to install and program your access control. Stand Alone is therefore the right solution for most smaller systems where you do not need a larger central unit. Mifare The advantage of using mifare technology is that a single card can contain a lot of different information. This means that, for example, in your company you can equip your employees with one card that unlocks the doors, gives access to certain machines and can be used for payment in the canteen. Programming All programming – creating, editing, deleting users – takes place directly on the reader. You can have several installations that work with the same codes, cards, fingers, etc. You can also connect the access control to your alarm system, as all our readers have two outputs. If you need to program many readers with the same information, you can simply program one reader, transfer the information to a Mifare/DESfire card. Afterwards, you can enter the information into the other readers simply by holding the card up to the reader. Read more about cloning readers. It is also possible to manage pin codes and mifare cards via Conlan Smartkey PC program. Using the program, you can create users with cards and/or tags that can be transferred to the reader via Conlan Backup card. more information Up to 80 users All programming can be copied between card readers using backup cards 2 transistor outputs External buzzer and LED Control IP67 protection rate for indoor and outdoor use 8 core 2.5 meter cable