Safetron motor lock 6300 lock box, hook rail, mandrel 35 mm

Cable lengths Together with the TwoCom control unit, the system provides 128-bit encryption for the highest security. The TwoCom system allows cable lengths of up to 100 meters between the lock box and control unit. This gives new possibilities for installing the control unit, for example it can be placed in protected environments such as electrical central rooms, server rooms, etc. Connection The TwoCom system is connected with only two wires between the lock box and the control unit. In these two wires, power supply, communication and encryption run in parallel. Initialization occurs automatically. The TC system also adds the possibility of serial connection of two locks against one TC control unit, which means that the installation can be carried out with fewer components and thus make it more cost-effective. Properties Back set 35 mm Hook bolt Time to unlock/relock less than 0.2 sec Mechanical key override (90° key turn) Designed for use with automatic door systems Automatic initialization TwoCom BUS technology Event log Parallel setup, up to two motor locks with a TwoCom control unit Can be used without a control unit (ML mode) Motor lock 6300 is certified according to SS-EN 14846 grade 7 and SSF-3522 class 3, 4 and 5 TECHNICAL DATA DC voltage 10-48VDC, 8-35VAC Power consumption: 60 mA @ 24VDC, max 300 mA vid activation Operating temperature -30°C to +70°C Suitable for Scandinavian oval and round cylinder and also Abloy cylinders Protec / Sento